|
Post by ianlange11 on Aug 2, 2006 21:49:00 GMT -6
I just built a Saga T-style and the I have found that the bridge is mounted off center. The low E is very close to the edge of the neck. Is there anything i can do with the screw holes already there and bridge already installed? Its off by about 1/16"-1/8". I was thinking about replacing the bridge anyways. Thanks, Ian
|
|
|
Post by GuitarAttack Forum on Aug 4, 2006 6:16:31 GMT -6
Ian - This is not an uncommon problem with the Saga T-Styles. You may have to plug the old holes and drill some new ones. I usually use fishing line to simulate the low and high E strings when I align a bridge. Tape the line to the headstock and bridge, and move the bridge until the path of the line looks right on the neck. Have you completed the finish on the guitar yet?
Again, I recommend putting the Saga guitars together and get them playing before applying a finish.
Send an update, John
|
|
|
Post by ianlange11 on Aug 5, 2006 22:28:11 GMT -6
John - Yeah, I should have put it together before i finished it. I'll send an update soon, might try extending the holes in the bridge plate or something.
-Ian
|
|
|
Post by GuitarAttack Forum on Aug 10, 2006 5:00:27 GMT -6
Is the guitar a solid color? Could you possibly hide a repair?
John
|
|