Advice On Removing Polly

[freewater2000]

Hi I'm new to the forum but have been studying for about two years here at GA.So here is my story. 1 Black Fernades body. 2 Popped polly off with heat gun.3 Stripper from Lowe's did not budge the rest.4 Should I just fill where a couple of spots that hit raw wood from the heat, then prime with the bins.Or should I take it down to the raw wood. The finish will be a solid color/nitro.
Thanks Again and I am looking forward to making some new friends.

[GuitarAttack Forum]

Since you are going with a solid color, I'd just fill with Famowood and prime with BINS. I'd let it sit about a week before spraying the final finish to make sure the repair is solid.

John

[freewater2000]

Thanks John that is what I thought might be the way to go.Its a nice strat copy,pawn shop special dated 95.My son has had a time with it,instant relic if you know what I mean..Thanks again