jb
New Member
Posts: 37
|
Post by jb on Nov 22, 2014 5:59:40 GMT -6
Hi Guys, .My question is i just bought a mx 412a cabinet used off a friend of mine and it has a 1'' tear in the grill cloth. I know you can replace the whole cloth but i was wondering if there is anyway to repair this for now. Thank you for any advice!!!! Attachments:
|
|
|
Post by GuitarAttack Forum on Nov 22, 2014 8:46:48 GMT -6
JB - a great cabinet. I don't think you could fix that grille unless you take it off and glue it from behind with some fabric glue, available at craft stores. You might consider recovering it, or just put a paint square around it and tell folks that is where you aim the mic! Grill cloth is available at mojotone. Here is the link: www.mojotone.com/amp-parts/amplifier-cabinet-grillclothYou might consider going with a vintage recover. If you gig with it, it sure won't be the first tear you get. Good luck, John
|
|